How To Ensure The Service Life Of Indoor LED Screen

Today, indoor LED screen suppliers will introduce you to the way to ensure the service life of indoor LED screens.

The way to ensure the service life of indoor LED screen

1. Keep dry: When using the indoor LED advertising screen, keep the product dry, and do not let water-containing objects and metal objects enter the LED display. Prevent moisture from corroding the LED display components, causing damage to the indoor LED display that cannot be repaired.

2. Avoid scratches: When cleaning the screen, avoid water intruding into the circuit board and causing short circuits. At the same time, pay attention to the LED display as far as possible not to collide with hard objects to avoid the threat to the LED display.

3. Dust removal: The indoor LED display should be installed in an environment with good air circulation and little dust. Routine maintenance work is also required. Dust removal of indoor LED display screens regularly can improve the display effect; large dust particles will not only weaken the display effect but also cause damage to the circuit of the LED display screen.

Indoor LED Screen

The daily maintenance of indoor LED display part

1) Turn on and off the LED display correctly: the first turn on the control computer to make it run normally, then turn on the LED display screen; turn off the LED display first, then turn off the computer.

2) Wipe correctly: The surface of the LED display can be wiped with alcohol, or dust can be wiped off with a brush or vacuum cleaner, and it cannot be wiped directly with a damp cloth.

3) Regular cleaning and maintenance: The LED display screen is a long time, the screen is definitely a piece of dust, it needs to be cleaned regularly and in time, and the dust-covered surface will affect the viewing effect for a long time. On the other hand, it can prevent the acidity of the air or other chemically-induced particulate matter from corrodes the display surface in wet conditions, which in turn increases the life of the display.

4) Regular inspection: The Indoor P3 cloud screen needs to be regularly checked whether it is working properly and whether it has caused damage to the circuit. If it does not work, it should be replaced in time, and the damaged circuit should be repaired or replaced.

5) Regular use: It is recommended that the large screen of the LED display should have more than 2 hours of rest a day. In the rainy season, the large LED screen should be used at least once a week. Under normal circumstances, the screen should be turned on at least once a month and should be on for more than 2 hours.