Front access LED display refers to LED display that can be fully accessed from frontal. The front design allow components including LED receiving card, power box and LED modules can be removed just from frontal, meaning the display can fit 90°shape wall-mounted installation perfectly. It also can be designed to have no door, no fan, and no ventilation for indoor wall-mounted LED display.

What Are the Differences between Front Access Display and Traditional One?

What are the differences between front access LED screen and traditional-designed ones? In short, we can expect it to achieve better effects no matter from aspects of visual experiences, protection level or installation method.

High Brightness

Our LED displays can achieve high brightness even more than 100,00nits due to our high-quality raw materies including SMD LED lamp beads, PCB board, mask, power supply, and so on. You do not have to worry about the final visual performances as the front-accessed LED screens also have high brightness level, wide grayscale and high contrast ratio.

No Need of Ventilation and Fans

There is no need for ventilation and fans for some front-access LED screens. The fanless design also allows cleaner inside of the screen as there will not be dusts and moisture rolled in by the fan system.

Better Maintenance Experience

You can install and maintain the screen easily just by some simple tools and operations. Within seconds, the frontal panel can be moved, so you can get in touch with the inner components!

Why Choose Front-service LED Display Panel?

1. Dual-maintenance, from both the front side and the rear side. People usually use its front maintenance function.which just need less than one minute to take out from the led display panel when for maintenance,saving the labor and maintenance cost.

2. Easy Maintenance, easy to take the modules with a 2.5mm hexagonal screwdriver,No screws, Just need to take out two fastening screws from the module, we can do the replacing easily. Which will save nearly 50% maintenance labor and time.

3. Reasonable PCB design, reliable and long life time, new plastic cover with new mold, smaller module gaps and better screenflatness. Excellent Waterproof structure design.

4. Cabinet with high hardness and pannel's flatness and Internal thread way make it looks more simple. Any cabinet size can be customized according to actual requirement. While Traditional led display need to take maintenance room into consideration, however front service led display panel solution will less your worry on these problems.

How to Do Frontal Maintenance?

There are several frontal access system of LED panels:

System with Front Screws

The LED modules will be attached to the cabinets through screws from frontal. For outdoor installation, this method is a safe and reliable choice.

This system can remove LED modules quickly, but the front access system is much more expensive than other systems as there should be a locking mechanism. For this reason, we usually will recommend larger LED modules to save your budgets if using this type of system.

Magnetic System

This is the simplest way to remove your LED display module. You only need a tool to remove them from the frontal just as our video shows in this post.

However, this system will need more coution when installing as there may be possible for the system to move minimally, leading to rework of installation.

Lock System

LED display modules will be connected to the cabinets by a lock system, so you have to insert a key from fontal to open the lock if you want to release the modules.

Conclusions

Front access LED display provides customers with more convenient using experience, and customers can remove LED display modules and other components from frontal within several seconds! It is also very suitable for installation site where needs the screen to be wall-mounted. NSE LED provides customers with high-standard front accessed LED screens with good prices all the time! Just contact us, you can get a free quote.