The Front-maintenance LED display module is the core element of the front maintenance LED display. The modules can be spliced together and maintained on the front side of the display. Besides, receiving card, and power supplies can also be easily replaced from the front of the display. It’s ideal to be used anywhere.

Rear maintenance VS Front maintenance

Rear maintenance is always used for large outdoor LED screens, which can be seen on the facades of buildings. There will be a special maintenance channel behind the screen to meet the needs of daily maintenance, which means a space needed to be reserved for that purpose. And the installation is complicated and both time and effort-consuming. Obviously, this way of maintenance isn't suitable for small indoor spaces with no extra room reserved for rear maintenance.

As the small-pitch LED screens become vogue, front maintenance gradually becomes the mainstream. Usually, the LED screen modules and cabinets with front maintenance are fixed with magnetism. Whenever maintenance is needed, use the magnetic tool to take the faulty modules off from the front. The magnetic locking requires less metal of the frame, making the LED display much more compact and thinner, space-saving, and lightweight.

However, both ways of maintenance have pros and cons. It’s cheaper to do the rear maintenance for LED screens. This kind of maintenance method is a more economical choice for outdoor large screens, roof screens, and column screens. For front maintenance, it’s space-saving, a well fit the indoors without ample room allocated for repair works. It makes assembling and dissembling the LED screen super simple with those magnetic locks. And when there’s a faulty module or a faulty pixel, one serviceman could do the repair job alone. It should be noted that the front maintenance products usually have a high density of pixels, and special attention should be paid to ventilation and heat dissipation to avoid affecting performance.

The benefits of the front maintenance LED display

● 320×320 full waterproof module

NSE front maintenance LED display has excellent features including an energy-saving IC drive, 50% power saving, low circuit loss, high refresh rate, and high brightness to meet the requirements of the harsh outdoor environment.

● Latch design

The front maintenance LED module has a latch design on the back. There are no screws between the LED module and the cabinet, making the disassemble process very easy. It only takes a few seconds to remove the LED module from the cabinet, which greatly improves the efficiency.

● Space-saving

Front maintenance LED display is suitable for indoor recessed and wall mounting to save installation space. The front maintenance LED screen module is designed to be thin in structure. While the front maintenance LED screen saves space it comes with a good display effect, well integrated with the surrounding environment.

● Ultra-thin cabinet

The front maintenance LED display will reduce the burden on the wall or building surface while being more aesthetically pleasing. This is because it is lighter in weight and thinner in the cabinet compared to the traditional rear maintenance LED display.

For NSE FM(Front Maintenance) series, pixel pitches of 3mm, 4mm, 5mm, 8mm, 10mm and brightness of over 5000 nits are available. Please contact us if you are interested.