The LED screens have a lot of electronic elements inside hence access to the interior is very important which is available in the form of Front Access LED Display, and Rear Back LED Display to ensure the correct type of maintenance. They can be used for video-conferencing, in studios, for meetings or anywhere to increase the efficiency of the meeting.

Front Access LED Display

The front access design of LED display makes the LED panel available from the front, which makes it suitable for locations where there is little to less space available for maintenance. This module also makes it easier and faster to assemble and disassemble the screen, which can save a lot of time and labor cost. With the front access LED module, you just have to find the fault module and fix it from the front directly. In installations where the screen is placed on a wall or façade one must use front access LED display otherwise the access to the system would be very time taking and tedious. The frontal maintenance can be carried out in three ways i.e. through a lock mechanism, magnetic system and a system with front screws.

Rear Back LED Display

The screen and rear maintenance has door-like openings to access the interior. This system is fairly common and we see it in a lot of indoor and outdoor led screens, however if it is being used outdoor the placement of the door to access the system should be in a way that it prevents water leakage. The rear back LED display model makes it difficult to locate the fault module and you’ll have to spend a lot of time in trying to find the fault and then fix it. The cabinets are most commonly made up of steel but aluminum is also often used, however the cabling isn’t visible from outside in both the cases and the rear access can be made through a door which uses a key. The cabinets are also equipped with thermostat fans for temperature control and high performance switch supplies.

The Differences Between Front Access and Rear Back LED Display

The only significant difference between front access LED display and rear back LED display is the amount of access they provide in which case the frontal access is easier and does not require a lot of labor and is also less time consuming when they are placed on a wall as far as the back access is concerned it is easier in the case of standing systems and the billboards etc. however a much newer technology exists which makes it possible to access from both the front and back and hence provides the features of both and works better under all conditions. The front access LED display is a much newer technology and more sustainable in terms of its life, ease of use, led display energy consumption, overall maintenance and labor costs and various other attributes.

Choose NSE Front Access LED Display

The advantages of NSE front access LED display:

Flexible Installation-The front maintenance LED display can be directly mounted on the wall. without complicated tools and perfectly integrated with surroundings.

Lighter Weight-The front serviceable feature of LED module enables the LED display cabinet to be thinner. therefore lighter in weight. It does not only save the cost of transportation but also facilitate the installation process.

320×320 Fully Waterproof Module-Energy-Efficient IC driver, 50% power saving, less circuit loss, high refresh rate and high brightness, meet the high requirements of the harsh outdoor environment.

Low Power Consumption-Adopt common cathode technology, and distribute the RGB power reasonably, improved energy efficiency significantly. More suitable for outdoor application, high standard on brightness, IC, Lamps, only for excellent Visual effects!

Are you interested in our products? Contact us now for a quote!